1.75mm 1KG Creality CR PLA 3D Printer Filament

CrealitySKU: TDP018

Color: White
Sold out


These high quality CR PLA filament by the printer makers, Creality is great for all 3D Printing enthusiasts and is an upgrade from the standard PLA!

This filament has good color consistence and have a specified shelf life of up to 6 months after opening and 1 year if unopened. Comes in vacuum sealed packaging with desiccant. CR PLA is also cold resistant while standard PLA is not. 

Material: CR-PLA
Dimension: 25.5CM*12CM*23CM
Density: 1.25±0.05g/gm³
Melt flow rate: 5-7g/min(190 degrees 2.16kg)
Water absorption: 0.5%
Tensile Strength: ≥60MPa
Flexural modulus: ≥60MPa
Elongation at break: ≥3.0%
Diameter: 1.75mm
Bubble: 100% no bubbles
N.W: 1kg(length:340m)
Coil Diameter: 200mm
Coil Height: 66mm
Coil Inner Diameter: 56mm
Temperature: PLA no heated bed


Note: Actual colours may vary. This is due to the fact that every monitor or mobile display has a different capability to display colours and that everyone sees these colours differently.



You may also like