eSun Standard Resin for LCD 3D Printer 0.5kg/bottle

eSunSKU: TDP143

Color: White
Only 1 unit left


eSun Standard Resin has high rigidity, easy to print thin-layer parts, good molding accuracy, can be printed as test part and be used for functional testing, rapid prototype printing.


eSun Standard Resin Features:

【High Precision & Low Shrinkage】eSUN Standard Resin contains methacrylate monomers as to reduce volume shrinkage during the photocuring process, which ensures the high precision of the print model with smooth finish.

【Fast Curing & Great Stability】eSUN Rapid Resin was designed to reduce printing time with its excellent fluidity. Meanwhile UV resin has good combination of hardness and toughness, strong adhesion of the model and easy to detach after forming.

【Bright and Vivid Colors】With high quality pigments and photo-initiators inside eSUN UV-Curing resin, the models printed with resin have a very pure and stunning color effect just like an artwork.

【Professional LCD Molding Resin】Special designed for LED light source to achieve better printing quality. eSUN Standard Resin is compatible with most LCD 3D printers for fast prototyping with toys, art and craft, home tools or jewelry making.

【Safe and Secure Packaging】Net Weight: 500g. Thickened bottle completely protected from light. Leak-proof bottle fully wrapped with a plastic bubble bag to make sure the resin stays in place where they belong.


Certifications: RoHS, Reach, TDS


Viscosity(mPa·s) 170-200
Density(g/cm3) 1.08-1.13
Tensile Strength(MPa) 46-67
Elongation at Break(%) 28-36
Flexural Strength(MPa) 46-72
Impact Strength(J/m) 14-42
Tearing Strength(GPa) /
Heat Distortion Temp(℃) /
Hardness(Shore D)  78-82
Grades (out of 10)
Strength(S)  8
Toughness(F)  7
Forming(P)  9
Accuracy(S)  7
Speed (A)  8


Recommended printing parameters
Settings Machine Type
Low Light Intensity Medium Light Intensity High Light Intensity (Monochrome LCD Screen)
Representative Machine AnyCubic Photon eSUN LCD 3.0
Nova Bene 4
Creality LD-002R
Anycubic MONO X
Phrozen Sonic Mini
Exposure Time/s 8-10 5-6 Not recommended
Bottom Layer Count 3-5
Bottom Exposure Time 40-60 30-40 Not recommended
Lifting Distance/mm 5.5&6-inch screen:5-6 or Higher ; 8.9&13.3-inch screen:8-12 or Higher
Lift Speed/mm·min-1  90-150  90-120  Not recommended
Retract Speed/mm·min-1    150-200



How to Use:

1) Shake well before use, prohibiting the use of resin in places where there is a lot of sunlight.

2) Wear gloves before use to avoid direct skin contact and keep the room ventilated.

3) If skin contacted with resin, please wash away with fresh running water as soon as possible. If you feel unwell, seek timely medical attention.

4) Once the model is complete, please wash it with high concentration ethanol alcohol (95% degree or higher) for 30 seconds at least (except water washable resin).

5) Do not pour the resin in the resin vat into the unused resin, do not leave the resin in the resin vat for a long time without use to avoid resin pollution affect the printing effect.


How to Store:

1) Keep away from light seals at room temperature. (Sunshine contains a lot of UV light, will solidify photosensitive resin.)

2) It is recommended to store the resin under 15C -35℃ in a sealed container. Avoid any dusty or moist environment.

3) The resin is stable under different climatic conditions and is also easy to store, overcoming the shortcomings of other resins easily damp softening and environmental corrosion.


eSun Standard Resin for LCD 3D Printer 0.5kg/bottle

eSun Standard Resin for LCD 3D Printer 0.5kg/bottle

Customer Reviews

Based on 1 review


Thank you very much for your support! Happy 3D printing and have a great day! :)

Estimate shipping

You may also like